HOME＞EXTRUDER

Choice of Extruder


【NRII Co-Rotating Parallel Twin Screw Extruder Series】

NRII-46mm NRII-75mm NRII-104mm
Screw Dia.(mm) 46 75 104
L/D 24-48 24-48 24-48
Main Motor(kw) 55 90 90 160 300 300
Max Screw Speed (rpm) 440 700 440 440 550 550
Output (ABS) (kg/h) 250 430 500～1500 1500
Torque per shaft (Nm) 598 613 975 1735 2598 2598

【NV Single Screw Extruder Series】

NV-40mm NV-65mm NV-100mm
standard option standard option standard option
Screw Dia.(mm) 40 65 100
L/D 36 36/24 36 36/24 34 34/24
No. of Vent 1 0～1 1 0～1 1 0～1
Main Motor(kw) 22 ～22 90 ～90 90 ～110
Fixed Speed Inverter Drive Fixed Speed Inverter Drive Fixed Speed Inverter Drive
Max Screw Speed (rpm) 320 430 162 162/128
Output(ABS) (kg/h) ～150 ～400 ～500


Choice of Auxiliary Equipment


Twin Screw Side Feeder Screw Dia: 38.5mm
Max 182rpm (1.5kw Inverter controlled)
Hopper: 7L
Twin Screw Feeder for Side Feeder Screw Dia: 63mm
Max 182rpm (1.5kw inverter controlled)
Hopper: 25L
Water Bath 1 bath type 2250mm (L) x 360mm (W)
2 bath type 4500mm (L) x 360mm (W)
9000mm (L) x 600mm (W)
Dryer 1 tower type Sucking nozzles (0.18kw): 18 pcs x 1
2 tower type Sucking nozzles (1.5kw) = 31pcs x 2
Pelletizer (strand cut) ST-SG3.0 Blade width: 150mm
Takeup speed: Max.62m/min
G-SG7.5 Blade width: 200mm
Takeup speed: Max.83m/min
NSP-SG10 Blade width: 250mm
Takeup speed: Max.83.8m/min
Classifier MSB 600 Capacity: 550kg / h
Vibrator: 0.2kw x 2P x 1
Pneumatic blower: 3kw
MSB 2000 Capacity: 1500kg / h
Vibrator: 0.2kw x 2P x 2
Pneumatic blower: 7.5kw
Catcher tank About 1000L (500kg)
About 2000L (1000kg)
Vaccum Pump
(wawter sealing type)		 Max pumping speed: 2100/2500L/min
Ultimate pressure: 2.3kPa

Copyright©2008- World Acknowledged Extruders of High Order Engineering By Freesia Macross Co.,Ltd. All Rights Reserved.
17 Kanda Higashimatsushitacho, Chiyoda-ku, Tokyo 101-0042 Japan　　　　Phone +81-3-6635-1844　　　Fax +81-3-6635-1842